Description
OPTIturn TH 3610D
Mechanics lathe
Technical Specifications
| Length (product) | 1,930 mm |
| Width / depth (product) | 725 mm |
| Height (product) | 1,620 mm |
| Weight (net) | 610 kg |
| Power drive motor | 1.5 kW |
| Electrical voltage | 400V |
| Phase (s) | 3 Ph |
| Current Type | ~ |
| power frequency | 50 Hz |
| Spindle taper | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore / rod diameter | |
| Center height | 180 mm |
| distance between centers | 980 mm |
| Circumferential diameter over machine bed | 356 mm |
| Circumference diameter in the bed bridge | 516 mm |
| Turning length in the bed bridge | 160 mm |
| bed width | 187 mm |
| Speed range | 70 – 2,000 min-1 |
| Number of speed ranges | 8 steps |
| Travel X-axis | 100 mm |
| Travel Y-axis | 170 mm |
| Tailstock | MK 3 |
| Tailstock quill stroke | 120 mm |
| Tailstock pinole diameter | |
| spindle taper | MK 6 |
| Steel holder pick-up height max. | 16 mm |
| Feed area along | 0.052 – 1.392 mm / rev |
| Number of feeds along | 32 |
| Feed area flat | 0.014 – 0.38 mm / rev |
| Number of feeds plan | 32 |
| Gradient Metric | 0.4 – 7 mm / rev |
| Number of slopes Metric | 26 |
| Gradient inches | 56 – 4 Gg / in. |
| Number of slopes inches | 34 |
description
- Fully equipped mechanic lathes. TH 3610D with digital position indicator DPA 21
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 5
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Gears and shafts hardened and ground,
running in an oil bath in precision bearings - Motor protection switch, lockable main switch
- Right / left rotation on bed sled switchable
- leading spindle
- Machine base with tool pockets
- Emergency stop device with foot control
- Safety handwheels with release function in the X and Z axis
TH 3610D:
- Digital position indicator DPA 21
- User-friendly membrane keypad, splash-proof, closed and glare-free
- Higher work accuracy
- Error rate is reduced
- X, Z0, Z axis with 8-digit display each
- glass scales
Room amenities:
switch cabinet
- 24 volt DC power supply
- All contactors and relays from Siemens or Schneider
main spindle
- Running in oil bath
- Gear wheels smooth,
hardened and ground
sled
- Precisely worked
- Handwheels with adjustable fine scale
0.04 / 0.02 mm - Quadruple tool holder
- All guides can be adjusted by wedge strips
- Adjustment range upper slide ± 90 °
LED machine light
- integrated in the chip protection
prism bed
- Heavily ribbed
- cast iron
- Induction hardened and precision ground
tailstock
- For taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
substructure
- Tool compartments on both sides
chip pan
- extractable
- guide rails
switch
- with life cycle calculation
- tested according to EN ISO 13849
Right-left switch
- two channels
- tested according to EN 23125
hand wheels
- decoupled
- tested according to EN 23125
Delivery Information
- Fixed bezel passage max. Ø 100 mm
- Running bezel passage max. Ø 95 mm
- LED machine light
- Reduction sleeve MK 6 / MK 3
- Two fixed centering points MK3
- Quadruple tool holder
- Change gear set
- substructure
- Initial machine filling with quality oil
- operating tool
Do not forget the lathe chuck!
